-First we had to align the wooden brace to the mount by measuring it to the precise point so we could screw in the bases together later on
– Navisha and Kelvin screwed in the nails to the sides of the mount
– The group is making the measurements to plot the location of the 3 nails that are going to be drilled in through the ends of the bases
New Materials: From Trip to Home Depot
– 6×2 Nails
Next week, Winston plans to come in with a few sets of 3D printed U-Hooks that will serve as the wheel’s “flat surface”.
We also agree to meet up more frequently since there is still much drilling and work still to be done.
Note: the wheel’s diameter is .81 inches.